Mathematical Model of COVID-19 Pandemic with Double Dose Vaccination.

This paper is concerned with the formulation and analysis of an epidemic model of COVID-19 governed by an eight-dimensional system of ordinary differential equations, by taking into account the first dose and the second dose of vaccinated individuals in the population. The developed model is analyzed and the threshold quantity known as the control reproduction number [Formula: see text] is obtained. We investigate the equilibrium stability of the system, and the COVID-free equilibrium is said to be locally asymptotically stable when the control reproduction number is less than unity, and unstable otherwise. Using the least-squares method, the model is calibrated based on the cumulative number of COVID-19 reported cases and available information about the mass vaccine administration in Malaysia between the 24th of February 2021 and February 2022. Following the model fitting and estimation of the parameter values, a global sensitivity analysis was performed by using the Partial Rank Correlation Coefficient (PRCC) to determine the most influential parameters on the threshold quantities. The result shows that the effective transmission rate [Formula: see text], the rate of first vaccine dose [Formula: see text], the second dose vaccination rate [Formula: see text] and the recovery rate due to the second dose of vaccination [Formula: see text] are the most influential of all the model parameters. We further investigate the impact of these parameters by performing a numerical simulation on the developed COVID-19 model. The result of the study shows that adhering to the preventive measures has a huge impact on reducing the spread of the disease in the population. Particularly, an increase in both the first and second dose vaccination rates reduces the number of infected individuals, thus reducing the disease burden in the population.

Metaheuristic algorithms for PID controller parameters tuning: review, approaches and open problems.

The simplicity, transparency, reliability, high efficiency and robust nature of PID controllers are some of the reasons for their high popularity and acceptance for control in process industries around the world today. Tuning of PID control parameters has been a field of active research and still is. The primary objectives of PID control parameters are to achieve minimal overshoot in steady state response and lesser settling time. With exception of two popular conventional tuning strategies (Ziegler Nichols closed loop oscillation and Cohen-Coon's process reaction curve) several other methods have been employed for tuning. This work accords a thorough review of state-of-the-art and classical strategies for PID controller parameters tuning using metaheuristic algorithms. Methods appraised are categorized into classical and metaheuristic optimization methods for PID parameters tuning purposes. Details of some metaheuristic algorithms, methods of application, equations and implementation flowcharts/algorithms are presented. Some open problems for future research are also presented. The major goal of this work is to proffer a comprehensive reference source for researchers and scholars working on PID controllers.

Analysis of deterministic models for dengue disease transmission dynamics with vaccination perspective in Johor, Malaysia.

Dengue is a mosquito-borne disease which has continued to be a public health issue in Malaysia. This paper investigates the impact of singular use of vaccination and its combined effort with treatment and adulticide controls on the population dynamics of dengue in Johor, Malaysia. In a first step, a compartmental model capturing vaccination compartment with mass random vaccination distribution process is appropriately formulated. The model with or without imperfect vaccination exhibits backward bifurcation phenomenon. Using the available data and facts from the 2012 dengue outbreak in Johor, basic reproduction number for the outbreak is estimated. Sensitivity analysis is performed to investigate how the model parameters influence dengue disease transmission and spread in a population. In a second step, a new deterministic model incorporating vaccination as a control parameter of distinct constant rates with the efforts of treatment and adulticide controls is developed. Numerical simulations are carried out to evaluate the impact of the three control measures by implementing several control strategies. It is observed that the transmission of dengue can be curtailed using any of the control strategies analysed in this work. Efficiency analysis further reveals that a strategy that combines vaccination, treatment and adulticide controls is most efficient for dengue prevention and control in Johor, Malaysia.

Optimal control and comprehensive cost-effectiveness analysis for COVID-19.

Cost-effectiveness analysis is a mode of determining both the cost and economic health outcomes of one or more control interventions. In this work, we have formulated a non-autonomous nonlinear deterministic model to study the control of COVID-19 to unravel the cost and economic health outcomes for the autonomous nonlinear model proposed for the Kingdom of Saudi Arabia. We calculated the strength number and noticed the strength number is less than zero, meaning the proposed model does not capture multiple waves, hence to capture multiple wave new compartmental model may require for the Kingdom of Saudi Arabia. We proposed an optimal control problem based on a previously studied model and proved the existence of the proposed optimal control model. The optimality system associated with the non-autonomous epidemic model is derived using Pontryagin's maximum principle. The optimal control model captures four time-dependent control functions, thus, u 1 -practising physical or social distancing protocols; u 2 -practising personal hygiene by cleaning contaminated surfaces with alcohol-based detergents; u 3 -practising proper and safety measures by exposed, asymptomatic and symptomatic infected individuals; u 4 -fumigating schools in all levels of education, sports facilities, commercial areas and religious worship centres. We have performed numerical simulations to investigate extensive cost-effectiveness analysis for fourteen optimal control strategies. Comparing the control strategies, we noticed that; Strategy 1 (practising physical or social distancing protocols) is the most cost-saving and most effective control intervention in Saudi Arabia in the absence of vaccination. But, in terms of the infection averted, we saw that strategy 6, strategy 11, strategy 12, and strategy 14 are just as good in controlling COVID-19.

Sensitivity assessment and optimal economic evaluation of a new COVID-19 compartmental epidemic model with control interventions.

Optimal economic evaluation is pivotal in prioritising the implementation of non-pharmaceutical and pharmaceutical interventions in the control of diseases. Governments, decision-makers and policy-makers broadly need information about the effectiveness of a control intervention concerning its cost-benefit to evaluate whether a control intervention offers the best value for money. The outbreak of COVID-19 in December 2019, and the eventual spread to other parts of the world, have pushed governments and health authorities to take drastic socioeconomic, sociocultural and sociopolitical measures to curb the spread of the virus, SARS-CoV-2. To help policy-makers, health authorities and governments, we propose a Susceptible, Exposed, Asymptomatic, Quarantined asymptomatic, Severely infected, Hospitalized, Recovered, Recovered asymptomatic, Deceased, and Protective susceptible (individuals who observe health protocols) compartmental structure to describe the dynamics of COVID-19. We fit the model to real data from Ghana and Egypt to estimate model parameters using standard incidence rate. Projections for disease control and sensitivity analysis are presented using MATLAB. We noticed that multiple peaks (waves) of COVID-19 for Ghana and Egypt can be prevented if stringent health protocols are implemented for a long time and/or the reluctant behaviour on the use of protective equipment by individuals are minimized. The sensitivity analysis suggests that: the rate of diagnoses and testing, the rate of quarantine through doubling enhanced contact tracing, adhering to physical distancing, adhering to wearing of nose masks, sanitizing-washing hands, media education remains the most effective measures in reducing the control reproduction number R c , to less than unity in the absence of vaccines and therapeutic drugs in Ghana and Egypt. Optimal control and cost-effectiveness analysis are rigorously studied. The main finding is that having two controls (transmission reduction and case isolation) is better than having one control, but is economically expensive. In case only one control is affordable, then transmission reduction is better than case isolation. Hopefully, the results of this research should help policy-makers when dealing with multiple waves of COVID-19.

Impact of control interventions on COVID-19 population dynamics in Malaysia: a mathematical study.

Coronavirus disease 2019 (COVID-19) pandemic has posed a serious threat to both the human health and economy of the affected nations. Despite several control efforts invested in breaking the transmission chain of the disease, there is a rise in the number of reported infected and death cases around the world. Hence, there is the need for a mathematical model that can reliably describe the real nature of the transmission behaviour and control of the disease. This study presents an appropriately developed deterministic compartmental model to investigate the effect of different pharmaceutical (treatment therapies) and non-pharmaceutical (particularly, human personal protection and contact tracing and testing on the exposed individuals) control measures on COVID-19 population dynamics in Malaysia. The data from daily reported cases of COVID-19 between 3 March and 31 December 2020 are used to parameterize the model. The basic reproduction number of the model is estimated. Numerical simulations are carried out to demonstrate the effect of various control combination strategies involving the use of personal protection, contact tracing and testing, and treatment control measures on the disease spread. Numerical simulations reveal that the implementation of each strategy analysed can significantly reduce COVID-19 incidence and prevalence in the population. However, the results of effectiveness analysis suggest that a strategy that combines both the pharmaceutical and non-pharmaceutical control measures averts the highest number of infections in the population.

Global stability and cost-effectiveness analysis of COVID-19 considering the impact of the environment: using data from Ghana.

COVID-19 potentially threatens the lives and livelihood of people all over the world. The disease is presently a major health concern in Ghana and the rest of the world. Although, human to human transmission dynamics has been established, not much research is done on the dynamics of the virus in the environment and the role human play by releasing the virus into the environment. Therefore, investigating the human-environment-human by use of mathematical analysis and optimal control theory is relatively necessary. The dynamics of COVID-19 for this study is segregated into compartments as: Susceptible (S), Exposed (E), Asymptomatic (A), Symptomatic (I), Recovered (R) and the Virus in the environment/surfaces (V). The basic reproduction number R 0 without controls is computed. The application of Lyapunov's function is used to analyse the global stability of the proposed model. We fit the model to real data from Ghana in the time window 12th March 2020 to 7th May 2020, with the aid of python programming language using the least-squares method. The average basic reproduction number without controls, R 0 a , is approximately 2.68. An optimal control is formulated based on the sensitivity analysis. Numerical simulation of the model is also done to verify the analytic results. The admissible control set such as: effective testing and quarantine when boarders are opened, the usage of masks and face shields through media education, cleaning of surfaces with home-based detergents, practising proper cough etiquette and fumigating commercial areas; health centers is simulated in MATLAB. We used forward-backward sweep Runge-Kutta scheme which gave interesting results in the main text, for example, the cost-effectiveness analysis shows that, Strategy 4 (safety measures adopted by the asymptomatic and symptomatic individuals such as practicing proper coughing etiquette by maintaining a distance, covering coughs and sneezes with disposable tissues or clothing and washing of hands after coughing or sneezing) is the most cost-effective strategy among all the six control intervention strategies under consideration.

Optimal control strategies for dengue fever spread in Johor, Malaysia.

Background Dengue is a vector-borne viral disease endemic in Malaysia. The disease is presently a public health issue in the country. Hence, the use of mathematical model to gain insights into the transmission dynamics and derive the optimal control strategies for minimizing the spread of the disease is of great importance. Methods A model involving eight mutually exclusive compartments with the introduction of personal protection, larvicide and adulticide control strategies describing dengue fever transmission dynamics is presented. The control-induced basic reproduction number (R˜0) related to the model is computed using the next generation matrix method. Comparison theorem is used to analyse the global dynamics of the model. The model is fitted to the data related to the 2012 dengue outbreak in Johor, Malaysia, using the least-squares method. In a bid to optimally curtail dengue fever propagation, we apply optimal control theory to investigate the effect of several control strategies of combination of optimal personal protection, larvicide and adulticide controls on dengue fever dynamics. The resulting optimality system is simulated in MATLAB using fourth order Runge-Kutta scheme based on the forward-backward sweep method. In addition, cost-effectiveness analysis is performed to determine the most cost-effective strategy among the various control strategies analysed. Results Analysis of the model with control parameters shows that the model has two disease-free equilibria, namely, trivial equilibrium and biologically realistic disease-free equilibrium, and one endemic equilibrium point. It also reveals that the biologically realistic disease-free equilibrium is both locally and globally asymptotically stable whenever the inequality R˜0<1holds. In the case of model with time-dependent control functions, the optimality levels of the three control functions required to optimally control dengue disease transmission are derived. Conclusion We conclude that dengue fever transmission can be curtailed by adopting any of the several control strategies analysed in this study. Furthermore, a strategy which combines personal protection and adulticide controls is found to be the most cost-effective control strategy.